Grundig GWD38400CW, User Manual

25 /EN

Washer-Dryer

 / 

 User Manual

5.7 Spin speed selection

Whenever a new programme is 

selected, the spin speed recommended 

for the selected programme appears 

on the 

Spin Speed

 indicator.

C

INFORMATION

•  It is possible that the recommended spin 

speed is not the highest value that can 

be selected for the relevant programme.

Press the 

Spin Speed Adjustment

button to change the spin speed. 

Spin speed decreases gradually.

Then, depending on the model of the 

product, "Rinse Hold" and "No Spin" 

options appear on the display.

If you are not going to unload your clothes 

immediately after the programme ends, you 

can use the 

Rinse Hold

 function to keep 

your laundry in the final rinsing water in order 

to prevent them from getting wrinkled when 

there is no water in the machine. This function 

holds the laundry in the final rinsing water.

5.7.1 If you want to spin 

your laundry after the 

Rinse Hold function:

- Adjust the 

Spin Speed

.

- Press the 

Start/Pause 

button. 

Programme will resume. The machine will 

drain the water and spin the clothes.

If you want to drain the water at the end 

of the programme without spinning, 

you can use the 

No Spin

 function.

C

INFORMATION

•  If you press the Spin Speed adjustment 

button in programmes where the spin 

speed is not allowed, the spin speed setting 

will not change and you will hear a warning.

If the washing steps permit, you can change 

the spin speed after the washing cycle has 

started. If they don’t permit it, you can’t do it.

5.7.2 Auxiliary function 

selection for drying

When you select a new washing programme, 

press the Drying Level Adjustment button to set 

the drying option suitable for this programme.

C

INFORMATION

•  If you press the Drying auxiliary function 

button in programmes where the drying 

step is not allowed, the drying light will 

not change and you will hear a warning.

•  Only for dying programmes, press 

the Drying Level Adjustment button 

to set the suitable drying option.

5.8 Drying programmes

A

 CAUTION!

•  During the drying programme, the machine 

automatically removes the lints coming from the 

clothes. The machine uses water in the drying 

step. For this reason, water tap of the machine 

should be open also in the drying programmes. 

•  When you select a new washing programme, 

press the Drying Level Adjustment button to set 

the drying option suitable for this programme.

C

INFORMATION

•  There is a spinning step in the drying 

programmes. Your machine performs 

this process in order to shorten the 

drying time. While the drying programme 

is selected, the spin speed setting is 

within the Maximum spin speed range. 

•  If you press the Drying auxiliary function 

button in programmes where the drying 

step is not allowed, the drying light will 

not change and you will hear a warning.

•  Only for dying programmes, press 

the Drying Level Adjustment button 

to set the suitable drying option.

•  In case of water outage, washing 

or drying cannot be performed.