Grundig GWD38400CW, User Manual

29 /EN

Washer-Dryer

 / 

 User Manual

C

INFORMATION

•  If the selected wetness level (Iron Dry, 

Wardrobe Dry, Wardrobe Extra Dry) 

cannot be reached at the end of the 

drying programme, your machine will 

automatically extent the programme 

duration. The programme will take longer.

•  If Timed Drying is selected, the programme 

will end at the end of the drying time 

even if the laundry is not dry.

•  If, during the drying programme, the 

selected wetness level (Iron Dry, Wardrobe 

Dry, Wardrobe Extra Dry) is reached 

or extra dryness is detected in the 

timed drying options, the programme 

will take shorter. The time decrease 

will be shown on the display.

5.11.1 Auxiliary Functions

• Express

When this function is selected, durations of 

relevant programmes get shorter by 50%.

Thanks to the optimised washing steps, 

high mechanic activity and optimum water 

consumption, high washing performance is 

achieved in spite of the reduced duration.

• Steam

Use this programme to reduce the 

wrinkles and shorten the ironing times 

for a small amount of cotton, synthetic 

or mixed clothes that are not stained.

• Remote Control 

You can use this auxiliary function button 

to connect your product to smart devices. 

For detailed information, see HomeWhiz 

and the Remote Control Function.

• Custom Programme

This auxiliary function can be used for 

Cottons and Synthetics programmes only 

with the HomeWhiz application. When 

this auxiliary function is enabled, you can 

add up to 4 additional rinse steps to the 

programme. You can select and use some 

auxiliary functions even though they are not 

found on your product. You can increase 

and decrease the time of the Cottons and 

Synthetics programmes within a safe range.

C

INFORMATION

•  When the Specialised Programme 

auxiliary function is selected, washing 

performance and energy consumption 

will be different than the value indicated.

• Drying

This function dries your laundry after the washing 

cycle. Please see the programme table for 

programmes that can be used with this function.

5.11.2 Functions/Programmes 

Selected by Pressing the 

Function Buttons for 3 Seconds

• Drum C

To select this programme, press and hold the 

auxiliary function button 2 for 3 seconds. Use 

regularly (once in every 1-2 months) to clean the 

drum and provide the required hygiene. Before 

the programme, it applies steam to soften 

residues in the drum. Operate the programme 

while the machine is completely empty. To obtain 

better results, put powder lime-scale remover 

for washing machines into the detergent 

compartment no. “2”. This programme contains 

a drying step that runs after the drum cleaning 

step to dry the inside of the machine.

C

INFORMATION

•  This is not a washing programme. 

It is a maintenance programme.

•  Do not run this programme when 

there are any objects in the machine. 

If you try to do so, the machine will 

automatically detect that there is load 

inside and abort the programme.