33 /EN
Washer-Dryer
/
User Manual
5.17 Changing the selections
after programme has started
5.17.1 Adding laundry after the
programme has started :
İf the status of the machine is suitable for
adding laundry, the laundry adding symbol
on the display will turn on. When you press
Start/Pause
button in such a case, door
lock will be disabled and the door will open
so that you can add laundry. When the door
lock is disabled, the door lock symbol on
the display will disappear. After adding the
laundry, close the door and press
Start/
Pause
again to continue the washing cycle.
9
10
11
12
13
14
15
16
8
7
6
5
4
3
2
1
5.17.2 Switching the
machine to pause mode:
Press
Start/Pause
to switch the machine to
the pause mode while a programme is running.
Pause symbol will flash on the display.
9
10
11
12
13
14
15
16
8
7
6
5
4
3
2
1
5.17.3 Changing the programme
selection after the programme has
started:
The programme change is not allowed when the
current programme is running. If Child Lock is
not enabled, you can select a new programme
after switching the current programme to pause
mode. This will cancel the current programme.
C
INFORMATION
• The newly selected programme
will start anew.
5.17.4 Changing the auxiliary
function, spin speed and
temperature settings
Depending on the step the current programme
has reached, you can cancel or enable auxiliary
functions. See “Auxiliary function selection”.
Also, you can change the spin speed,
temperature and drying settings. See "Spin
speed selection" and "Temperature selection".
C
INFORMATION
• If changes are not allowed, an
audible warning will be heard.
• If the temperature of the water inside the
machine is high or if the water level is above
the door line, the loading door will not open.
5.18 Cancelling the programme
The programme will be cancelled when the
machine is turned off and on again. Press
and hold the
On/Off
button for 3 seconds.
9
10
11
12
13
14
15
16
8
7
6
5
4
3
2
1
C
INFORMATION
• If you press the On/Off button
while the child lock is enabled, the
programme will not be cancelled. You
should cancel the Child Lock first.
• If you want to open the loading door after
you have cancelled the programme but
you cannot do it since the water level in
the machine is above the loading door
baseline, turn the Programme Selection
knob to Spin+Pump programme and
discharge the water in the machine.
5.19 End of programme
Once the programme is completed,
“End” will be displayed.
If you do not press any button for 10 minutes,
the product will turn off automatically.
Display and all indicators will turn off.
Completed programme steps will be
displayed if you press the On/Off button.
Summary of Contents for GWD38400CW
Page 47: ......
Page 48: ...www grundig com ...