34 /EN
Washer-Dryer
/
User Manual
5.20 Your machine has the
"Pause Mode" function.
After using the On/Off button to switch on the
machine, if you do not start any programme in the
selection step or do not perform anything else,
or if you do not do anything in 2 minutes after the
selected programme has ended, the programme will
automatically switch to energy saving mode. Also, if
your product has a display that shows programme
time, this display will be completely turned off. If
you turn the Programme Selection knob or touch
any button, the lights and the display will switch
back to the previous position. The selections you
make when exiting the energy efficiency mode
may change. Check if your selections are correct
before starting the programme. If necessary,
make adjustments again. This is not an error.
5.21 Remote Control Function
The Remote Control function allows you to use
your smart device to check your washing machine
and get information about its status. With the
Remote Control, you can use your smart device
to do many things that can also be performed on
the machine. Plus, you can use some features
only with the Remote Control function.
You must download the Remote Control application
from the app store of your smart device to
use the WLAN feature of your machine.
Make sure that your smart device is
connected to internet to install the app.
If you are using the app for the first time, please follow
the on-screen instructions to complete your user
account registration. Once the registration procedure
is complete, you can use all products with the Remote
Control function in your house on this account.
During setup, Bluetooth must be enabled on
your smart device and the device itself must
be connected to internet. Your smart device
must be near the washing machine.
You can tap "Add/Remove Product" on the "Products"
page to see the products paired with your account.
You can pair these products on this page.
Once the application is installed, the Remote Control
function allows your washing machine to send you
push notifications through your smart device.
C
INFORMATION
• Please visit www.homewhiz.com to see
the Android and iOS versions supported
by the HomeWhiz application.
Your washing machine will send you
a notification through the HomeWhiz
application in the following cases:
• When the programme is over,
• When the door of the washing
machine is opened,
• When No water warning is displayed,
• When safety warning is given,
C
INFORMATION
• To be able to use the HomeWhiz function,
make sure that the app is installed on your
smart device and that your washing machine
is paired with your smart device via Bluetooth.
If the washing machine is not paired with
your smart device, it will function as an
appliance without the HomeWhiz feature.
• Your product will run once it is paired with
your smart device via Bluetooth. Checks
performed on the app will be enabled
through this pairing. For this reason, the
Bluetooth signal between the product and
the smart device must be strong enough.
A
WARNING!
• All the safety measures described in
"GENERAL SAFETY INSTRUCTIONS"
section of the user manual apply to
the remote operation through the
Remote Control function as well.
• For HomeWhiz setup, your smart device must
be connected to internet. Otherwise, the
HomeWhiz App will not let you complete the
setup process successfully. If you are having
problems with your internet connection,
please contact your internet service provider.
5.21.1 Installing the
Remote Control App
For the application to run, a connection
must be established between your
product and the application.
A
WARNING!
• For HomeWhiz setup, your smart
device must be connected to internet.
Otherwise, the HomeWhiz App will not
let you complete the setup process
successfully. If you are having problems
with your internet connection, please
contact your internet service provider.
Summary of Contents for GWD38400CW
Page 47: ......
Page 48: ...www grundig com ...
