36 /EN
Washer-Dryer
/
User Manual
5.21.3 Deleting Remote
Control Account Linking
To delete the linking of a washing machine
that has been paired with someone else’s
account, follow the steps below.
• Press the On/Off button to turn
on your washing machine.
• While your machine is on, press and
hold the Remote Control button and
Delayed Start button for 5 seconds.
9
10
11
12
13
14
15
16
8
7
6
5
4
3
2
1
• After countdown “5-4-3-2-1“ on the display,
you will hear a beep for your request. Deleting
the linking will take a few seconds. Once
it is complete, you will hear two beeps.
A
WARNING!
• Once you have completed this
procedure, you cannot use the Remote
Control function of your machine
until you perform setup again.
• Your product does not have to be
connected to your smart device to delete
the account pairing. Your request will be
received. Pairing will be automatically
deleted as soon as your product
connects to your smart device.
5.21.4 Using the Remote
Control function
After setting up the Remote Control
function, wireless connection will be
enabled automatically. To activate or
deactivate the wireless connection, please
see 5.11.2 Wireless Connection
.
If you turn off and on your machine while
wireless connection is active, it will automatically
reconnect. If the paired device goes out of
the range, the wireless connection will turn off
automatically. For this reason, you will need to
turn it on again if you want to use the Remote
Control function. You can check the wireless
connection symbol on the display to track your
connection status. If the symbol is continuously
on, you have connection. If the symbol is
flashing, the product is trying to connect. If
the symbol is off, you have no connection.
A
WARNING!
• If the wireless network connection is enabled
on your product, you can select the Remote
Control function. If the Remote Control function
cannot be selected, check the connection
status. If the connection fails, repeat the
initial set-up settings on the appliance.
If you want to control your washing machine
remotely, press the Remote Control button
to enable the Remote Control function.
Once the product is accessed, you will
see a screen similar to the one below.
9
10
11
12
13
14
15
16
8
7
6
5
4
3
2
1
While the Remote Control function is on, you
can only manage turn-on, turn-off and status
follow-up operations through your washing
machine. All functions except child lock can
be managed through the application.
You can check the function indicator
on the button to follow whether the
Remote Control function is On or Off.
If the Remote Control function is Off,
all the operations are handled on the
washing machine and only status follow-
up is allowed on the application.
If the Remote Control function cannot
be enabled, you will hear a warning after
pressing the button. Bluetooth setting
being Off, having no devices paired with
Bluetooth or the washing machine's door
being open are examples for such cases.
Once you activate this function on the
washing machine, it will remain enabled
apart from certain conditions and allow you
to control your washing machine remotely
via Bluetooth regardless of whether the
washing machine is switched on or off.
Summary of Contents for GWD38400CW
Page 47: ......
Page 48: ...www grundig com ...
