33 /EN
Washer-Dryer
/
User Manual
5.15 Starting the programme
1. Press
Start/Pause
button to start the programme.
9
10
11
12
13
14
15
16
8
7
6
5
4
3
2
1
2. Loading door will be locked. After the
loading door has been locked, door lock
symbol will appear on the display.
3. The programme follow-up lights on the display
show the current programme step. When the
running programme is selected, the drying
follow-up LEDs light up in consecutive order.
9
10
11
12
13
14
15
16
8
7
6
5
4
3
2
1
C
INFORMATION
• If no programme is started or no button
is pressed within 10 minutes during the
programme selection process, the product
will turn off automatically. Display and all
indicators will turn off. If you press the On/
Off button, the programme information
set as default will be displayed.
5.16 Loading door lock
There is a locking system on the loading door of
the machine that prevents opening of the loading
door in cases when the water level is unsuitable.
“Door Locked” symbol appears on the
display when the loading door is locked.
Opening the loading door in
case of power failure:
C
INFORMATION
• In case of a power failure, you can
use the loading door emergency
handle under the pump filter lid to
manually open the loading door.
A
WARNING!
• Before opening the loading door,
make sure that there is no water in the
machine to avoid flooding. Water may
be hot and could cause scalding.
•
Turn off and unplug the appliance.
•
Open the pump filter lid.
•
Remove the loading door emergency
handle behind the filter cover with a tool.
•
Open the loading door by pulling the loading
door emergency handle downwards.
•
Try to pull the handle downwards again
if the loading door is not opened.
•
Bring the loading door emergency
handle to its original position after
opening the loading door.
