background image

24 ENGLISH

CLEANING AND CARE

___________________________

Cleaning and care

1

Switch off the appliance and, 
if using in mains mode, remove
the mains adapter plug from the
socket.

2

If attached, remove comb
attachment I and carefully 
clean the blade using the brush
supplied.

3

Clean the housing and comb
attachment with a soft cloth
moistened with water.

Important

7

Never hold the appliance, 
cable or mains adapter in water
or any other liquid.

4

Before using again, ensure all
parts have been carefully dried
with a soft cloth.

5

Do not use cleaning agents.

6

Re-attach the comb attachment.

Note

7

Remove hair remains after each
use.

7

Your appliance’s blade does 
not normally have to be 
oiled, as it is made from a
combination of two different
materials (ceramic and stainless
steel). If you want to retain the
original condition of the blade
for a long time, it is worthwhile
oiling the blade at regular
intervals using the oil supplied.

Storage

If you are not going to be using 
the appliance for a lengthy time,
please store it carefully.

1

Ensure the appliance is switched
off and is completely dry.

2

Pack the parts in the original
packaging and store them 
in a cool, dry place.

3

Ensure the appliance is kept out
of reach of children.

Summary of Contents for MT 4640
















Reviews: