ENGLISH
36
Inserting batteries in the remote
control
1
Open the battery compartment by pushing down its
lid.
2
When inserting the batteries (2 x 1.5 V, R 6/UM 3/
AA), observe the polarity marked on the base of the
battery compartment.
Note:
7
Do not expose the batteries to extreme heat, cau-
sed for example by direct sunlight, heaters or fire.
7
If your hi-fi system no longer reacts properly to re-
mote control commands, the batteries may be flat.
Always remove used batteries. The manufacturer
accepts no liability for damage resulting from le-
aking batteries.
Environmental note:
7
Batteries, including those which contain no heavy
metal, should not be disposed of with household
waste. Please dispose of used batteries in an envi-
ronmentally responsible manner. Find out about
the legal regulations which apply in your area.
CONNECTION AND PREPARATION
_____________________
Connecting the headphones
1
Insert the headphone plug (ø 3,5 mm) into the »
U
«
socket on the right side of the hi-fi.
– The loudspeakers of the hi-fi system are switched
off.
Note:
7
Excessive sound pressure from the earphones or
headphones can cause hearing loss.
Connecting the power cord
Note:
7
Check that the mains voltage on the type plate (on
the bottom of the hi-fi system) corresponds to your
local mains supply.
1
Plug the mains cable supplied into the »
AC ~
« soc-
ket on the hi-fi system.
2
Plug the power cord into the wall socket.
Caution:
7
The hi-fi system is connected to the mains with the
power cord. Pull out the power cord when you
want to completely disconnect the hi-fi system
from the mains.
7
Unplug the mains plug to disconnect the hi-fi sys-
tem from the mains. Make sure the power plug is
easily accessible during operation and not hinde-
red by other objects.
