ENGLISH
38
Setting and storing radio stations
Initial station search
1
After the hi-fi system has been connected to the
mains for the first time, the device searches for the
40 stations with the best reception and stores them.
– Display: »
FM
«, the frequency in rapid run-through
and »
P 00
«.
P00
FM 97.55
2
After this initial search, the device activate a demo
programme.
3
To end the demo programme switch the hi-fi system
on by pressing »
ON/OFF
« briefly.
Notes:
7
The initial station search can be interrupted by
briefly pressing »
7
«.
7
The initial station search can be repeated any
time by pressing and holding down »
PROG./
RAND./TIME
« until the frequency display
switches to rapid run-through. The stations stored
previously will be deleted.
Automatic station search
1
Switch on the hi-fi system by pressing »
ON/OFF
«.
– Display: »
FM TUNER
«, then the wave band and fre-
quency or station name.
PI6
FM TUNER
f
2
Press »
FUNCTION
« to select the frequency band
(FM or MW).
– Display: »
FM
« or »
MW
«.
SETTINGS
_______________________________________________________________
3
Activate the station search by pressing »
UP TUN-
ING/ADJ/ALBUM DOWN
« until the frequency
display changes to rapid run-through.
– The search stops when a station is found.
PI6
ENERGY
f
PROG
!
Manual station search
1
To move the frequency forward in steps, briefly press
»
UP TUNING/ADJ/ALBUM DOWN
« several
times.
– The frequency changes in 50 kHz steps (FM) or 9
kHz steps (MW).
FM 87.65
MHz
Storing stations on station positions
1
Press »
UP TUNING/ADJ/ALBUM DOWN
« to
select the station you want to store.
2
Press »
PROG./RAND./TIME
« to activate the
memory function.
– Display: Both the station position »
P0I
« and
»
PROG
« flash.
P0I
FANTASY
f
!
3
Select desired station position with »
$s6
MEM
5a
aa
«.
Note:
7
If stations are already stored on the preset posi-
tions, they are overwritten when new stations are
stored.
4
Press »
PROG./RAND./TIME
« again to store the
station.
– Display: »
PROG
« and, for example, »
P02
«.
P02
FANTASY
f
!
