39
ENGLISH
SETTINGS
_______________________________________________________________
5
To store more stations, repeat steps
1
to
4
.
Note:
7
If the hi-fi is disconnected from the mains for a long
time, all the preset stations are deleted.
Setting the time
The following settings may only be performed in stand-
by mode.
1
To set the 12-hour format, briefly press »
PROG./
RAND./ TIME
«.
– Display: briefly »
I2HR
«, then the current time, for
example »
PM
MON I2:02
« (»
PM
« for the second
half of the day).
I2:02
MON
PM
2
To set the 24-hour format, press »
PROG./RAND./
TIME
« again.
– Display: briefly »
24HR
«, then the current time, for
example »
MON 0:03
«.
3
To set the time, press and hold down »
PROG./
RAND./ TIME
«.
– Display: the hours flash.
0
:03
MON
4
Set the hours using »
UP TUNING/ADJ/ALBUM
DOWN
« and press »
PROG./RAND./TIME
« to
confirm.
– Display: the minutes flash.
I2:
03
MON
5
Set the minutes using »
UP TUNING/ADJ/
ALBUM DOWN
« and press »
PROG./RAND./
TIME
« to confirm.
– Display: the day of the week flashes.
6
Set the day of the week using »
UP TUNING/
ADJ/ALBUM DOWN
« and press »
PROG./
RAND./TIME
« to confirm.
– Display: »
CT ON
« flashes.
I2:24
CT ON
7
Set the RDS time synchronisation with
»
UP TUNING/ADJ/ALBUM DOWN
« and
confirm with »
PROG./RAND./ TIME
«.
Notes:
7
You must reset the time after a power failure or
when the mains plug is pulled out.
7
Some RDS stations transmit an RDS time signal. If
the selected RDS programme transmits this time in-
formation, the time on the system is automatically
updated. This takes about five minutes.
Resetting the hi-fi system
This function enables you to reset the hi-fi in the event
of a mal function. Stored radio stations are retained but
the clock and alarm time are deleted.
1
With the device on, press the »
RESET
« button on the
bottom of the hi-fi system using an implement such as
a paper clip.
