ENGLISH
40
Switching the hi-fi system on and off
1
Switch the hi-fi system on from standby mode by
pressing »
ON/OFF
«.
– The last input source used is automatically se-
lected.
2
Press »
ON/OFF
« to switch the hi-fi system to stand-by.
– Display: »
GOOD BYE
« briefly, then the current time
and day of the week.
I2:24
GOOD BYE
Note:
7
The only way to disconnect the hi-fi system from
the mains supply is to pull the plug.
Adjusting the brightness of the
display
1
Change the overall brightness of the display back
light using »
BRIGHTNESS
« on the remote control
in three levels (bright, medium, off).
– The auto dimmer adapts the brightness of the dis-
play to the brightness of the surroundings.
Note
7
Minimum power consumption in standby mode is
only achieved if the backlighting in the display is
switched off.
Changing the colour of the display
lighting
1
Change the colour of the display back light by press-
ing »
COLOR
« on the remote control. There are
eight options.
Selecting the input source
1
Select the input source by pressing »
FUNCTION
«.
– Display: »
FM TUNER
«, »
MW TUNER
«, »
CD
«, »
SD
CARD
«, »
USB
« or »
AUX
«.
I2:24
CD
GENERAL FUNCTIONS
__________________________________________
Adjusting the volume
1
Adjust the volume with »
–
«.
– Display: briefly »
VOL
« (»
MIN
«, »
I
« to »
39
«, and
above this »
MAX
«).
Muting
With this function you can switch the hi-fi speakers to
and from mute mode.
1
Press »
MUTE
« on the remote control to switch the
sound on and off.
– Display: »
MUTE
« when mute is on.
MUTE
Selecting sound effects
You can select from the sound settings USER, CLASSIC,
POP, JAZZ and ROCK. The basic setting is USER.
1
Select the sound setting by pressing »
DSC
«.
– Display: »
NN
«, »
X
«, »
C
«, »
V
« or »
Y
«.
P02
FANTASY
f
PROG
!
JAZZ
V
Setting the equaliser
The USER sound setting allows you to make your own
personal equaliser settings.
1
When the device is on, press »
DSC
« until »
NN
«
appears in the display.
2
Press »
DSC
« again for approximately 2 seconds.
– Display: »
BASS 0
«.
BASS 0
USER
NN
3
Press »
DSC
« to choose the setting (BASS or TREBLE).
– Display: »
BASS 0
« or »
TRE 0
«.
Note:
7
If you do not press any button within five seconds,
the hi-fi system will automatically quit this mode.
