41
ENGLISH
GENERAL FUNCTIONS
__________________________________________
Selecting the Tuner input source
1
Press »
FUNCTION
« to select the input source.
– The most recently selected station is activated (Last
Station Memory).
– Display: e.g. »
FM I00.60
« or »
ENERGY
«.
PI5
ENERGY
f
PROG
!
Selecting a preset position
1
Press »
FUNCTION
« to select the frequency band
(FM or MW).
2
Select the preset position in steps by pressing
»
$s6
MEM
5aaa
«.
– Display: »
PROG
« and, for example, »
P02
« and
the frequency or the station name.
P02
VILRADIO
f
PROG
!
TUNER MODE
________________________________________________________
4
Set the values by pressing »
–
« (maxi-
mum »
+6
«, minimum »
-6
«).
– The equaliser display disappears after 5 seconds.
Switching the Ultra Bass System on
and off
1
Press »
UBS
« to switch the Ultra Bass System on and
off.
– Display: »
UBS
B
«.
P02
FANTASY
f
!
UBS
B
Stereo/mono reception
When the hi-fi system receives FM stereo stations, »
)
«
appears in the display. If the signal from the FM stereo
station is weak, you can improve the sound quality by
switching to mono reception.
1
Press »
FM MODE
« on the remote control to switch
to mono reception.
– Display: »
)
« disappears.
2
To switch back to FM stereo, press »
FM MODE
« on
the remote control.
– Display: »
)
«.
P02
FANTASY
f
!
Note:
7
The mono or stereo setting is saved when you
store a station as a preset.
Selecting favourites
1
You can save a favourite station on preset 1, which
can be selected directly on the remote control using
»
FSM
«.
Switching the display
In Tuner , CD- USB- and SD-mode you can switch the
display to show the time and day.
1
Press »
DISPLAY
« repeatedly on the remote control
until time and day appear in the display.
I2:24
TUE
