- 3 -
- 3 -
1 Safety
regulations
Important
• Assembly, installation and servicing must be carried out by an authorised
electrician.
• Switch off operating voltage before the start of assembly or service work or
pull out the mains plug.
• Install the system …
-
in a dust-free, dry environment
-
so that it is protected from moisture, vapours, splashing water and damp
-
somewhere protected from direct sunlight
-
away from the immediate vicinity of heat sources
-
at an ambient temperature of < 50 °C.
• Make sure the device is adequately ventilated.
Do not cover the ventilation slots.
• Beware of short circuits!
• No liability is accepted for damage caused by faulty connection or inexpert
handling.
• Observe the relevant norms, regulations and guidelines on the installation and
operation of antenna systems.
• Earth the SAT receiver using the equipotential bonding rail in accordance with
DIN EN 50083 and VDE 0855.
• Do not perform installation and service work during thunderstorms.
Take action to prevent static discharge when working on the device.
2 General
information
2.1 Packing contents
1 Cassette PHDQ 2002 BC or PHDQ 3002 BC or PHDQ 4002 BC or
PHDQ 5002 BC
2 HF connection cables
1 Assembly instructions (on CD)
1 Measuring log
