- 16 -
- 16 -
Press the
button.
—> The menu “Setting the LNB oscillator frequency”
–
“
LNB-Freq.:
” is activated (page 18).
or
• Press the
button.
—> The sub menu “Modulator settings”
–
“
OUTPUT: Modulator
” is activated.
Modulator settings (only Bx…A)
• By pressing the
buttons, switch the modulator
(HF output) “
on
” (default setting).
• Press the
button.
—> The display shows “
OUTPUT: LEVEL HF OUT:
”.
Setting output level of the channel strips (only Bx…A)
• Press the
button.
—> “
OUTPUT: LEVEL
CONTROL
” appears in the display.
Note:
In this mode a digital carrier is set to the analogue pic-
ture carrier frequency of the output channel of the channel
Bx 1A
Modulator:
OUTPUT:
on
on / off
* )
Bx 1A
LEVEL HF OUT:
OUTPUT:
0
0
…
-7
Bx 1A
LEVEL
CONTROL
OUTPUT:
* )
* )
