- 9 -
- 9 -
Note:
The operating software of the Cassette can be updated via the socket
“RS 232”
3
(9-Pin-Sub-D) by means of a PC or notebook.
Use the “
BE-Flash
” software as the update software. You can make drop
and pass filter settings in the channel strip “
B
” using the “
MTP
” PC software.
You can find the current operating software of the Cassettes on the website
“
http://www.gss.tv
”.
4 The operator control panel at a glance
4.1 Menu items
Program the Cassette using the keys on the head end control unit. The two-line
display of the control unit then shows the menus.
You can select the following main menu items
with the
button:
– Cassette and channel strip
– Output channel
– LNB oscillator frequency
– Symbol rate
– Input frequency
– QAM modulation
– Stuffing
4.2 Operator control panel
You can individually select the menus and menu items step-by-step using the
key pad of the head end:
scrolls forward through the menu
AUDIO
scrolls backward through the menu
▶
◀
/
select parameters in the menus
set values, initiate actions
selects
sub-menus
M
saves all entries
The parameters to be set are displayed underlined (cursor).
BE–Remote
PROFESSIONAL
V. 34
