1 - 18
GRUNDIG Service
Allgemeiner Teil / General Section
RCD 2000
MULTIPLE ROOM OPERATION
________________________________________________
Switching on a pair of loudspeakers
1
Press the »
CONTROL
« button on the remote control.
2
From the »
CONTROL
« menu, select the »
SELECT ROOM
« item by pres-
sing »
A
« and then »
OK
« to confirm.
3
From the »
SELECT ROOM
« menu, select the »
ROOM 2
« item by pressing
»
A
« or »
S
« and then »
OK
« to confirm.
4
Switch on the loudspeakers using the »
y
y
VOLUME
x
x
« button.
Installing additional remote contols
If you are using several pairs of loudspeakers you can also install additional
remote control units. These enable you to operate pairs of loudspeakers in diffe-
rent rooms, regardless of where the HiFi is located.
1
Switch on the HiFi and all the loudspeakers.
2
Press the »
CONTROL
« button on the first remote control.
– The »
CONTROL
« menu appears.
3
From the »
CONTROL
« menu, select the »
INSTALL
« item by pressing
»
A
« and then »
OK
« to confirm.
4
From the »
INSTALL
« menu, select the »
RC
« item by pressing »
A
« and
then »
OK
« to confirm.
– The remote control display reads: »
INSERT BATTERIES IN THE
NEW RC.
«.
5
Insert three batteries (3 x 1.5 V alkaline, LR6/AA/AM3) in the battery com-
partment of the second remote control, making sure that the polarity is cor-
rect.
– The second remote control is now ready for operation.
INSTALL
1
SPEAKERS
REPLACE SPEAKERS
RC
BACK
p
o
INSTALL
1
INSERT BATTERIES
IN THE NEW RC.
MULTIPLE ROOM OPERATION
________________________________________________
Replacing loudspeakers on the HiFi
If you replace a pair of loudspeakers, you must install the new pair on the
HiFi system in the same manner.
1
Press the »
CONTROL
« button on the remote control.
– The »
CONTROL
« menu appears.
2
From the »
CONTROL
« menu, select the »
INSTALL
« item by pressing
»
A
« or »
S
« and then »
OK
« to confirm.
3
From the »
INSTALL
« menu, select the »
REPLACE SPEAKER
« item by
pressing »
A
« or »
S
« and then »
OK
« to confirm.
4
Press »
+
« or »
–
« to select the room containing the pair of loudspeakers
which were replaced, and then press »
OK
« to confirm.
5
Switch on the left loudspeaker of the new pair using the »
POWER
« button.
– The remote control display reads: »
R
C
D LS1
« and the orange indicator
in the »
POWER
« lights up, which means that the remote control and the
HiFi have detected the left loudspeaker.
6
Switch on the right loudspeaker of the new pair using the »
POWER
« but-
ton.
– The remote control display reads: »
R
C
D LS1 LS 2
« and the orange
indicator in the »
POWER
« lights up, which means that the remote control
and the HiFi have detected the right loudspeaker.
Hint:
If the message »
ALL SETS ON RCD LS1 LS 2
« does not appear,
repeat the process from Step
1
onwards.
REPLACE SPEAKERS
SELECT ROOM: 1
BACK
+
-
INSTALL
SPEAKERS
REPLACE SPEAKERS
RC
BACK
p
o
