Station memory
59 memory locations are available for storing stations.
• Tune to the station you want to store with the station search function or manually.
• Press
MEMORY
.
– The station is stored at the next available memory location.
– The tuner software first checks the station memory for available memory
locations. If all the locations are occupied,’
MEM FULL
’ appears on the
display for approx. 1.5 seconds.
– Assigning a station frequency to two different memory locations is not
possible. The selected station is stored at the lowest available memory
location, meaning that you need not enter a number for memory locations.
– Every time the settings STEREO/MONO and ANTENNA/CABLE are changed,
they are automatically stored.
Storing stations
• If you want to store a station, press
MEMORY
.
– The first station which is stored is assigned to memory location 1, the
second station to memory location 2 and so on.
• If you want to move a stored station to another memory location, press
MEMORY
.
– The station is always assigned to the first available memory location.
• Pressing the button again assigns a station to the next available memory
location.
• If you keep the button depressed, the memory locations are scanned one
after the other, deleting the previously assigned memory location.
Example:
You want to move your favourite station from memory location '6' to memory
location '1'.
• Select memory location '1'.
• Press
CANCEL
once.
– This deletes, or clears, memory location '1'.
You can also press
MEMORY
to move the station on location '1' to the next
available free memory location.
• Now select position '6', your favourite station, and then press
MEMORY
.
Your station is now stored on memory location '1'.
Calling up a stored station
• When you want to call up a stored station, press
STATION
O P
. The
stations are called up in ascending or descending order.
Stations can also be selected via the system remote control:
• Select the radio input by pressing the
TUNER
button.
• Press the
1
STATION
2
buttons.
– The display shows the selected memory location number, and the unit
switches to this memory location.
– It is not possible to select a memory location which has not (yet) been
assigned to a station.
Example:
Memory location 6 is not assigned to a station.
If you are situated at memory location number 5 and press once STATION
P
the unit will jump to memory location 7 (provided this location has been
assigned to a station).
Deleting a memory location
• If you want to delete a memory location to which a station is assigned, first
call up its number.
• Press
STATION
O P
until you reach the station you want to delete.
You may also use the
STATION
1 2
buttons on the remote control.
• Press
CANCEL
.
– The memory location is deleted, and the memory location number does not
light up on the display anymore.
• Hold
CANCEL
down for 5 seconds if you want to delete all the memory
locations, for example after you move to another location.
– 'ERASE ?' appears briefly on the display.
• Keep the button depressed for an additional 5 seconds until the display
shows '87,5 MHz'.
– The station memory is deleted.
• If you now press one of the
STATION
O P
buttons, 'FREE' is shown on
the display.
• If you release the
CANCEL
button before these 5 seconds have elapsed, the
erase function is not carried out.
ANTENNA
FM 10420
MHz
8
©
20
Radio
GB
