ENGLISH
37
MULTI-ROOM MODE
________________________________________________________________
8
In the »
INSTALL LSP
« menu, select the next room by pressing, for
example, »
ROOM 2
«.
– Display: »
SWITCH ON THE LEFT SPEAKER
«.
9
Turn on the left loudspeaker with the mains switch.
– The operation indicator of the loudspeaker first flashes orange, then
green. The left loudspeaker has been detected.
– Display: »
SWITCH ON THE RIGHT SPEAKER
«.
Note:
If the loudspeakers in another room are already installed on the WT2, then
their operation indicators do not flash. In this case, briefly press the
»
RESET
« button.
10
Turn on the right loudspeaker with the mains switch.
– The operation indicator of the loudspeaker first flashes orange, then the
indicators of both loudspeakers light up green. The right loudspeaker has
been detected.
– Display: briefly, »
INSTALLATION OF SPEAKERS IN CURRENT ROOM
COMPLETED
«.
11
To install other pairs of loudspeakers in other rooms, repeat steps
3
to
10
.
Note:
After installation, the new loudspeakers in rooms 2 to 9 are in the standby
mode, i.e. the operation indicators light up orange.
To set up these loudspeakers the remote control must be set to the relevant
room (see page 49 of the operating manual).
You can now proceed with the settings for volume and tone.
INSTALLATION
CANCEL
SPEAKER
THE RIGHT
SWITCH ON
ROOM 2
Summary of Contents for RCD8300
