50
INSTALLING THE WT2 MODULE
_____________________________________________
1
The HiFi system and the loudspeakers must be switched to standby.
Note:
To integrate the WT2 into the television, e.g. Lenaro, see the WT2 installati-
on manual.
2
Switch on the television with the mains switch.
– The »Loudspeaker wireless module« menu appears.
3
Select the »Install front« line with »
P+
« or »
P-
« on the TV remote control,
call it up with »
OK
« and set it to »Yes«. Then confirm it with »
OK
« (if there
are no front speakers installed, set it to »No« with »
P+
« or »
P-
«).
4
Select the »Install surround« line with »
P+
« or »
P-
«, call it up with »
OK
«
and set it to »Yes«. Then confirm it with »
OK
« (if there are no surround
speakers installed, set it to »No« with »
P+
« or »
P-
«).
5
Select the »Start installation« line with »
P+
« or »
P-
« and confirm it with
»
OK
«.
– The »Start installation« status menu appears on the television screen. It
shows information on the current installation status.
– You can start the installation.
6
Press the »
RESET
« button on the left front speaker until the indicator flashes
orange. The display switches to flashing green.
– The left loudspeaker has been detected.
– The display on the television switches to »Installed«.
7
Press the »
RESET
« button on the right front speaker until the indicator flas-
hes orange. The indicators on both speakers switch to green.
– The right loudspeaker has been detected.
– The display on the television switches to »Installed«.
2
2
2
Summary of Contents for RCD8300
