CONNECTION AND PREPARATION
Connecting earphones or headphones
1
Insert the headphone plug (3.5 mm) into the »
U
« socket on the
device.
– This switches off the loudspeakers.
Note:
Excessive volume levels when using headphones or earphones
can damage your hearing.
Note:
You can also use the »
U
« socket to connect the device to a hi-fi
system.
Putting batteries in the remote control
1
Open the battery compartment by turning the lid of the com-
partment to the right and lifting it off.
2
Observe the polarity marked on the base of the battery com-
partment when inserting the batteries (2 x 1.5 V LR 03/AM
4/AAA type).
Notes:
Do not expose the batteries to extreme heat, caused for example
by direct sunlight, heaters or fire.
If the device no longer reacts properly to remote control
commands, the batteries may be flat. Always remove used
batteries. The manufacturer accepts no liability for damage
caused by leaking batteries.
Environmental note:
Batteries, including those which do not contain heavy metal,
should not be disposed of with household waste. Always dispose
of used batteries in accordance with local environmental
regulations.
14
