GENERAL FUNCTIONS
----------------------------------------------------
Setting the custom equalizer
The “myEQ” sound setting allows you to make your own personal
equaliser settings.
1
Open the audio menu by pressing »
DSC/UBS
« briefly.
2
Select the »
my EQ
« sound setting with »
8
« or »
9
«.
Note:
If you do not press any button within five seconds, the device will
automatically quit the setting.
3
Select the »
BASS
« with »
A
« or »
S
« and select the required
value (min. »
-4
«, max. »
+4
«) with »
8
« or »
9
«.
4
Select the »
TREBLE
« with »
A
« or »
S
« and select the required
value (min. »
-4
«, max. »
+4
«) with »
8
« or »
9
«.
– The sound setting menu is switched off after approx. 5 secs and
the set value is stored.
Switching the Ultra Bass System on and off
1
Select the »
UBS
« sound setting by pressing and holding down
»
DSC/UBS
«.
2
Switch the ultra bass system on and off with »
8
« or »
9
«.
– Display: »
UBS ON
« or »
UBS OFF
«.
Setting the display
1
Press and hold down »
DISPLAY
« to open the function.
– Display: the menu for the display.
2
Select the »
Contrast
« with »
A
« or »
S
« and select the
required value (min. »
1
«, max. »
8
«) with »
8
« or »
9
«.
3
Select the »
Brightness
« with »
A
« or »
S
« and select the
required value (min. »
1
«, max. »
4
«) with »
8
« or »
9
«.
– The display menu is switched off after approx. 5 secs and the
set values are stored.
Notes:
In standby, the brightness of the display is one level darker than
when operating.
In battery operation, the backlighting in the display switches off
after approx. five seconds.
Digital Sound
<
-
myEQ
-
>
BASS
0
TREBLE
0
Digital Sound
myEQ
<
-
BASS
0
-
>
TREBLE
0
Digital Sound
UBS
<
-
ON
-
>
<
-
Contrast
5
-
>
Brightness 4
24
