46
Recording a CD on to cassette (CD COPY)
You can start the recording process from CD on to cassette by pressing only
one button.
Individual tracks of a CD or music programme can be distributed on
both sides of the cassette in this manner, so that long, empty passages at the end
of a cassette are avoided.
1
Insert the cassette into the cassette compartment and put a CD into the CD
compartment.
2
Wind the cassette to the desired point.
3
Select the desired track on the CD.
4
Start the recording by pressing the »
CD-COPY
« button and briefly holding
it down.
– Recording starts. The CD player will begin playback after about four
seconds.
Note:
If you begin recording at the start of the cassette, the HiFi will play the lead-
in tape for about six seconds. Playback of the CD is then automatically
started.
During recording, the only buttons that can be used are »
5
«, »
DISC
OPEN/CLOSE
« or »
TAPE OPEN/CLOSE
«. All other functions are
blocked.
If playback of the CD is stopped, recording stops as well.
If one side of the cassette is full, CD playback is set to pause.
If the Reverse function is selected, recording is automatically continued on the
second side of the cassette.
CASSETTE MODE
________________________________________________________________________
