1
“
0
...
“
9
– The appropriate programme position is directly selected with the numeric buttons, P 123 for
example.
When selecting a multi-digit programme position, the numbers are entered in sequence from
left to right. For example, enter 1, 2, and 3.
When you enter the digit 1, the following appears in the display:
If no further entry is made, the display switches automatically to the single digit programme
position P1.
This allows you to choose up to 199 SAT programme positions and 99 radio programme positions.
– Direct entry of the receivers´s input frequency.
– In audio mode, enter sound frequency directly, 7.02 MHz, for example.
– Timer programming: enter Start/Stop time.
– Switching on receiver from stand by.
Switches between radio and SAT programme.
“
2
E “ R
In timer mode, switches timer on and off
“
3
“
TV
Some television sets switch automatically into AV mode when SAT receiver is switched on.
The
“
TV
button enables you to switc back into terrestrial mode.
“
ǵ
4
“ “ “
– Continues switching the programme position step by step and switches on from stand by.
“
Ƕ
– Select line in timer menu.
5
“
Ǻ
Menu for date/time and timer (for summer/winter time correction, for example), switches back to
the programme.
6
O
Confirms or store various values.
7
“
Ǽ
Switcesh reciever into stand by. Possible only with remote control.
Remote Control Buttons
6
Important operating functions and basic settings can be car-
ried out with the
rc sat
remote control.
Please insert the battery included observing correct polarity.
The marking for this is on the compartment bottom. Close
the cover.
If a battery is exhausted, "
b
AA
tt
" appears briefly in the receiver
display.
Change the exhausted battery in time. We cannot be held
reponsible for damages resulting from an exhausted battery.
Buttons
PI ––
Radio
“
O
