53
ENGLISH
Recordingaprogrammefromthe
channellist
1
Press »
OK
« to open the channel list.
2
Select a channel with »
<
« or »
>
« and press
»
OK
« to confirm.
3
Press »
EXIT
« to exit from the channel list.
4
Press »
« (red) to start recording.
– Recording information is displayed:
Recording symbol, channel name, pro-
gramme time and recording time.
– These information will disappear after a
short while. Recording symbol and record-
ing time will appear on the lower right
corner of the screen.
5
To end the recording, press »
7
«.
6
Press »
« (green) to accept;
or
press »
« (red) to continue the recording.
Programmesettingforrecord-
ing
...withelectronicprogrammeguide
Electronic programme guide data can be used
for recording.
25 EPG reminder and/or recorder can be set in
total.
1
Press »
GUIDE
« to open the electronic
programme guide.
2
Select the preferred TV program with »
V
«
or »
Λ
«.
– Information about the actual TV program
is displayed.
3
Press »
<
« or »
>
« to select the TV program
you want to record.
4
To add broadcasts to the timer press »
OK
«.
– Information for the TV program to be
recorded will be displayed.
5
Select the line »Record« with »
>
« and press
»
OK
« to confirm.
– Recording data range appears.
6
Press »
OK
« to confirm.
7
Press »
EXIT
« to end the menu.
Note:
7
If the data for the recording is to be changed,
open menu with »
MENU
«. Select the menu
item »Schedule List« with »
>
« and confirm
with »
OK
«. Press »
« (green), change the
data and and save it with »
« (blue).
Notes:
7
A warning is displayed before the timer re-
cording starts and counts down for 10 sec-
onds to allow you to switch to the channel.
At the end of 10 seconds, the channel to be
recorded appears automatically.
7
If the timer recording starts during playback,
playback stops. If you do not select »Yes« in
the warning prompt, recording will start auto-
matically at the end of the countdown.
7
Only for UPC customers Note: Parts of previ-
ous or next files can be included into the re-
cord while the programme is being recorded
resulting from possible Programme Guide er-
rors. In such cases, keep in mind that the high-
est family protection level will apply for the
whole recording if one or more of those pro-
grammes have any level of family protection.
Setthelead/follow-uptime
With this function you can change the recording
time set by the electronic TV guide.
If you think that a program will start a few min-
utes earlier or will end several minutes later, you
can „add“ up to 60 minutes to this time
1
Open the menu with »
MENU
«.
2
Select the menu item »Schedule List« with
»
>
« or »
<
« and press »
OK
« to confirm.
3
Activade the »Padding Time« menu with
»
« (blue).
4
Change the start time with »
<
« or »
>
«.
5
Use »
V
« to switch to the line »End« and
change the end time with »
<
« or »
>
«.
6
Save the setting with »
« (green).
7
Press »
EXIT
« to end the menu.
USBRECORDING
-------------------------------------------------------------------------------------------
Summary of Contents for Toronto 55 CLE 6545 AL
Page 1: ...EN Toronto 55 CLE 6545 AL ...
