ENGLISH
12
Switchingonandoff
The only way to disconnect the hi-fi system from
the mains supply is to pull out the plug from the
wall socket.
1
Switch on the hi-fi system from standby mode
by pressing »
8
« or »
SOURCE
« on the hi-fi sys-
tem.
– The system switches to the last selected
source.
Note
7
If you use the remote control, you can press
»
8
« or one of the buttons »
CD
«, »
USB
«,
»
SD
«, »
TUNER
«, »
CASS
« or »
AUX
«.
2
Switch the hi-fi system to standby mode by
pressing »
8
«.
– Display: the current time.
Automaticshutdown
If the device is in the “Stop“ position or on socket
»
AUXIn
« is no audio signal available, the de-
vice switches automatically to Stand-by mode
after 15 minutes. For further using switch on the
device again.
Selectingtheinputsource
1
Select the input source (TUNER, CD, USB,
SD, CASS, AUX ) with »
SOURCE
« on the
hi-fi system; or by using the remote control,
press one of the buttons »
CD
«, »
USB
«, »
SD
«,
»
TUNER
«, »
CASS
« or »
AUX
«.
– Display: »
CD
«, »
USB
«, »
CARD
«
»
100.60
« (frequency of the radio sta-
tion), »
CASS
« or »
AUX
«.
Adjustingthevolume
1
Adjust the volume with »
+
VOLUME-
« on
the hi-fi system; or »
+
« and »
–
« on the remote
control.
– Display: briefly »
VOL
« from »
0
« to »
31
« then
»
MAX
«.
GENERALFUNCTIONS
---------------------------------------------------------------------------------------
Selectingsoundsettings
You can choose between the preset sound set-
tings FLAT, CLASSIC, ROCK, POP and JAZZ.
1
Select the sound setting using »
EQ
« on the re-
mote control.
– Display: »FLAT«, »CLASSIC«, »ROCK«,
»POP« or »JAZZ«.
SwitchingtheUltraBassSystem
onandoff
1
Switch the Ultra Bass System on and off by
pressing »
UBS
« on the remote control or hi-fi
system.
– Display: »
«, if the UBS is activated, disap-
pears if function is deactivated.
Muting
You can switch the hi-fi speakers to and from
mute mode with this function.
1
Activate mute with » « on the remote control.
– Display: »
MUTING
«.
2
Deactivate mute with » « on the remote con-
trol.
– Display: »
MUTING
« disappears.
Displayingthetime
1
Display the time by pressing »
DISPLAY
«.
2
Press »
DISPLAY
« again to switch off the time.
