13
ENGLISH
TUNERMODE
----------------------------------------------------------------------------------------------------------------------
Selectingthetunerinputsource
1
Select the TUNER input source with
»
SOURCE
« on the hi-fi system or »
TUNER
«
on the remote control.
– The most recently selected station is played
(Last Station Memory).
– Display: »
« and station name or the fre-
quency.
Selectingpresets
1
Press »
+ PRESET –
« on the hi-fi system or
press » « or » « on the remote control.
Stereo/monoreception
If the hi-fi system is receiving a stereo broadcast,
»
!
« appears in the display. If the signal from
the stereo channel is weak, you can improve the
sound quality by switching to mono reception.
1
Press »
7
/
!
« to switch to mono reception.
– Display: »
!
« disappears.
2
To switch back to stereo, press »
7
/
!
«
again.
– Display: »
!
«.
RDSinformation
RDS (Radio Data System) is an information sys-
tem which is transmitted additionally by most FM
stations.
When the hi-fi system receives an RDS station,
the station name appears in the display, for ex-
ample »FANTASY« and »
«.
Notes:
7
It may take some time before all the RDS
information is available.
7
GRUNDIG has no influence on the correct-
ness of this information.
SearchingforRDSstations
1
Search for the RDS station by pressing »
3
«
or »
4
« repeatedly until an RDS station is re-
ceived and »
« appears in the display.
– If the reception is strong enough, the station
name appears after a short time.
ViewingRDSinformation
If an RDS station is being received, information
can be opened up in the display.
1
Press »
DISPLAY
« repeatedly to cycle through
the information.
BAY 3
(example)
Displays the name of the radio station
being listened to.
POP M
(example)
Displays the type of station being lis-
tened to, e.g. Pop, Classic, News, etc.
If no station type code is transmitted,
»
NO PTY
« appears on the display.
Text
Displays the message about the sta-
tion being listened to as ticker text (if
offered).
18:00
(example)
Current time.
97.90
(example)
Displays the waveband and the fre-
quency of station being listened to.
RDStimesynchronisation
Some RDS stations transmit a time signal. If re-
ception is good, the time information will update
the time if you have selected the »
CT ON
« op-
tion during the time setting, refer to "Setting the
clock„ at the "SETTINGS" section.
Time synchronisation can take several minutes,
and even with good reception the accuracy de-
pends on the time signal being transmitted. The
automatic time setting is always activated when
the device is switched from standby to tuner
mode and receives a RDS station.
Stationtypessearch(PTY)
1
Press »
REP
« to call up the station type search.
2
Repeatedly press »
3
« or »
4
« select the
desired station type and confirm with »
REP
«.
– The search stops once a station of the se-
lected type is found.
3
Press »
REP
« to stop the search.
