11
ENGLISH
Connecting to the mains supply
AUX IN
Notes:
7
Check that the mains voltage on the type
plate (on the back of the hi-fi system) cor-
responds to your local mains supply. If this is
not the case, contact your specialist dealer.
7
Before connecting the AC power cord to the
wall socket, ensure that all other connec-
tions have been made.
1
Insert the supplied mains cable into the
»
AC~
« socket on the hi-fi system.
2
Plug the power cord into the wall socket.
Caution:
7
The hi-fi system is connected to the mains
with the power cord. Pull out the power plug
if you want to completely disconnect the hi-fi
system from the mains.
7
Make sure the power plug is easily acces-
sible during operation and not hindered by
other objects.
CONNECTION AND PREPARATION
---------------------------------------
Putting battery in the remote
control
1
Open the battery compartment by pushing the
tab and sliding the battery tray out.
2
Insert one CR2025 battery with the correct
polarity as shown on the battery tray.
3
Slide the battery tray into the battery compart-
ment.
Notes:
7
Do not expose the battery to extreme heat,
caused for example by direct sunlight, heat-
ers or fire.
7
Remove the battery when it is flat or when
you know that the hi-fi system will not be
used for a long period of time.
Environmental note:
7
Batteries, including those which do not con-
tain heavy metal, should not be disposed
of with household waste. Always dispose
of used batteries in accordance with local
environmental regulations.
