ENGLISH
16
GENERAL FUNCTIONS
---------------------------------------------------------------------------------------
Setting the equaliser (User) ...
The User sound setting allows you to make your
own personal equaliser settings.
... with the Jog-Shuttle on the hi-fi system
1
Press repeatedly the Jog-Shuttle on the hi-fi sys-
tem to select »
VOL
«.
2
Turn the Jog-Shuttle to select the setting »
EQ
«
and confirm with » «.
3
Turn the Jog-Shuttle to select the setting »
USER
«
and confirm with » «.
4
Turn the Jog-Shuttle to select the setting »
BASS
«.
Adjust the bass by turning the Jog-Shuttle and
confirm with » «.
5
Turn the Jog-Shuttle to select the setting
»
TREBLE
«.
Adjust the treble by turning the Jog-Shuttle
and confirm with » «.
... with the buttons on the remote control
1
Briefly press »
DSC
« until »
USER
« is shown on
the display.
– Display: »
USER
«.
2
Press and hold »
DSC
« until »
BASS
« is shown
on the display.
3
Set the value of bass by pressing
» « or » « and confirm with » «.
– Display: »
TREBLE
«.
4
Set the value of treble by pressing
» « or » «and confirm with » «.
Note:
7
If you do not press any button for 5 seconds,
the hi-fi system will automatically quit the
setting.
Switching the Ultra Bass System
on and off...
... with the Jog-Shuttle on the hi-fi system
1
Press repeatedly the Jog-Shuttle on the hi-fi sys-
tem to select »
VOL
«.
2
Turn the Jog-Shuttle to select the setting »
UBS
«
and confirm with » «.
3
Switch on or off the Ultra Bass System
(»
UBS ON
« or »
UBS OFF
«) by turning the Jog-
Shuttle and confirm with » «.
... with the buttons on the remote control
1
Activate the function by pressing »
UBS
«.
– Display: »
UBS ON
« (the UBS is activated) or
»
UBS OFF
« (function is deactivated).
2
Switch the Ultra Bass System on and off by
pressing »
UBS
«.
Muting
You can switch the hi-fi speakers to and from
mute mode with this function.
1
Activate mute with » « on the remote control.
– Display: »
MUTE ON
«.
2
Deactivate mute with » « on the remote con-
trol.
– Display: »
MUTE OFF
«.
Enlarge the display information
You can enlarge the display informations.
1
Press and hold »
DISPLAY
« on the remote
control to enlarge the upper line of display
in formation.
2
Press and hold »
DISPLAY
« again to enlarge
the lower line of display information.
3
Press and hold »
DISPLAY
« again to show
both lines in normal size.
