ENGLISH
15
Selecting the tuner input source
1
Press »
FUNCTION
« to select the input source.
– Display: »
« and the frequency.
– You will hear the last selected radio station.
Selecting radio stations
1
Press »
AM/FM
« on the device to select the frequency band (FM or AM).
2
Press »
aa
TUNING
ss
« on the device to select the radio station.
Stereo/mono reception
When the hi-fi system receives FM stereo stations, »
ST.
« appears in the display. However,
if the signal from the FM stereo station is weak, you can improve the sound quality by
switching to mono reception (Display: »
MONO
«).
1
Press »
FM MODE
« on the device to switch to mono reception.
2
Press »
FM MODE
« on the device to switch to stereo reception.
TUNER
TUNER MODE
_________________________________________________
Selecting the input source
1
Press »
FUNCTION
« to select the input source (TUNER, or TAPE).
– Display: »
« or »
«.
Adjusting the volume
1
Adjust the volume with »
–
z
+
«.
Muting
This function enables you to mute the connected speakers.
1
Press »
p
« on the remote control to activate the mute function.
– Display: »
«, the back light of the display flashes.
2
Press »
p
« on the remote control to deactivate the mute function.
– Display: »
« goes out, the back light of the display remains on.
ľ
ľ
CD
TUNER
GENERAL FUNCTIONS
__________________________________
