Grundig VCC 6270 C, Instruction Manual

10 ENGLISH

Cleaning_cyclone_assembly_

and_dust_container

1__

Empty the dust container 

A

 if it is filled 

with dirt.

2__

Open the dust container cover  

C

 by 

turning it counterclockwise. Remove the 
cyclone assembly 

V

, foam filter 

T

 and 

motor protection filter 

U

.

3__

Wash the cyclone assembly 

V

 in warm 

water, if required, and wait until the 

cyclone group is dry.

4__

Clean the dust container 

A

 with a damp 

cloth, if necessary.

5__

Wash the filter in warm water.

6__

Lightly tap across the filter to remove 

excessive water. Repeat this and wait until 

it is dried by itself. Do not use any heating 

device for drying.

7__

Make sure that all components are 

completely dried before installing all 

components to the appliance and 

switching on the appliance.

8__

Replace  the  cyclone  assembly 

V

,  foam 

filter 

T

  and  motor  protection  filter 

U

  in 

their places and close the upper cover 

C

so that it is seated with a click.

INFORMATION_______________________________

Cleaning_and_maintenance

■

  Before cleaning, unplug the appliance from 

mains and let the vacuum cleaner to cool 

down completely.

■

  Do not immerse the vacuum cleaner in water 

or in any other liquid. Ensure that no liquid 

gets inside the appliance during cleaning.

■

  Components may be cleaned as follows:

Cleaning_the_dust_container

1__

The  dust  inside  the  dust  container  should  be 

emptied when it reaches Max level.

2__

Press the dust container release button 

E

 to 

remove the dust container 

A

 by holding from 

the dust container handle 

B

.

3__

Press dust quick release button 

S

 over a 

dustbin, for emptying the dust container 

A

.