31
ENGLISH
INFORMATION
------------------------------------------------------------------------------------------------------------------
Displayingsignalinformation
(only for digital television channels)
1
Open the menu with »
İ
«.
– The »PICTURE« menu appears.
2
Select the menu »CHANNEL SETUP« with »
–
«
or »
+
«.
3
Select »Signal Information« with »
V
« or »
Λ
«
and press »
●
« to confirm.
– You will see information on the channel,
modulation, quality and signal strength.
Notes:
7
The lower section of the menu shows the
signal properties. The further the bar for
»quality« and »Signal Strength« extends to
the right, the better the reception signal.
7
The signal level not only depends on your re-
ceiver system, but also on the channel which
is currently active. Remember this when
aligning your antenna using the signal level
display.
4
Press »
İ
« to end the display.
Automaticsoftwareupdate
(Only for digital television channels)
If this function is enabled, the device automati-
cally searches for new software and updates it if
a new version is available.
1
Select the line »Automatic Update« with »
V
«
or »
Λ
« and confirm using »
●
«.
2
Press »
–
« or »
+
« to switch the function on or
off.
3
Press »
İ
« to end the setting.
Updatingsoftware
(only for digital television channels)
1
Open the menu with »
İ
«.
– The »PICTURE« menu appears.
2
Select the »OPTIONS« menu with »
–
« or
»
+
«.
3
Select the »Software Update« menu by press-
ing »
V
« or »
Λ
«.
4
Press »
●
« to start the software update.
– The software is updated automatically, if
possible.
5
Press »
İ
« to end the setting.
