25
ENGLISH
USBRECORDING
--------------------------------------------------------------------------------------------------------------
Connectingexternaldatamedia
Notes:
7
Before connecting the data medium, switch
the television to standby with »
8
«. Connect
the device and then switch the television on
again.
7
Before removing the external data medium,
the television must be switched to standby,
so that no data loss occurs.
7
Your television features two USB sockets,
»
USB1
« and »
USB2
«.
»
USB1
« is used to connect data media,
which require an additional power supply
– for example, external hard disks.
1
Connect the »
USB1
« socket of the television
and the corresponding socket of the data
medium (external hard disk) using a USB ca-
ble;
or
insert the USB plug of the USB memory stick
into the »
USB2
« socket of the television.
2
Confirm the display »
« with »
«
(green).
– The file browser appears.
Notes:
7
The »
USB2
« socket of the television sup-
plies a maximum power of 500 mA in ac-
cordance with USB specifications. External
hard disks which require more power may
therefore only be connected to the »
USB1
«
of the television.
7
If you use a network cable for external hard
disks which have been connected to the
»
USB1
« socket of the television, this network
cable must also be disconnected from the
power supply when the television is switched
off.
7
External data media may not be disconnect-
ed from the television while files on the data
medium are being accessed.
SettingsforUSBrecording
Selectingthemenu
1
Open the menu with »
i
«.
2
Select the line »USB RECORDING« with
»
V
« or »
Λ
« and press »
●
« to confirm.
– The »USB RECORDING« menu appears.
PRnP
Disk
Safely Remove Disk
Auto Preview
USB
On
Partition
Exit
Back
USB RECORDING
Manage data medium
Capacity Used
%3
Used (MB)
1249
Total (MB)
38145
Remaining SD recording time
1,008 min
Remaining HD recording time
288 min
20.09.2010
15:46
OK
C:
Summary of Contents for VLE 7131 BF
Page 1: ...LCD TV EN VLE 7131 BF...
