39
ENGLISH
CONVENIENCEFUNCTIONS
------------------------------------------------------------------------
Settingthedateandtime
Automaticsetting
Your television set detects the difference in time
to Greenwich Mean Time (GMT) automatically,
as long as the channel selected transmits a time
signal.
1
Select the line »Time Adjustment« with »
V
«,
then select the option »Manual« with »
<
«
or »
>
«.
– The lines »Time Zone« and »Daylight Sav-
ing« are active.
2
Select the line »Time Zone« with »
V
« and
press »
●
« to confirm.
– The »Select Time Zone« menu appears.
3
Select the appropriate time zone with »
<
«,
»
>
«, »
V
« or »
Λ
« and press »
●
« to confirm.
4
Select the line »Daylight Saving« with »
V
«
and use »
<
« or »
>
« to set the option »Auto«,
»Off« or »On«.
5
Press »
i
« to finish the setting.
Manualsetting
You can also set the difference in time manually
– for example, when the correct time is not de-
tected automatically or does not correspond to
local time for other reasons
1
Select the line »Date & Time« with »
V
« or
»
Λ
« and press »
●
« to confirm.
2
Select the line »Auto« with »
V
« or »
Λ
« and
press »
●
« to confirm.
– Date and Time will be updated
automatically;
or
3
Select the input box with »
V
« or »
Λ
«, enter
the data for Date and Time with »
1...0
«
and press »
●
« to confirm.
Timersettings
Enteringtheswitch-offtime
(sleeptimer)
In the »Sleep Timer« menu you can enter a time
for the television to switch off. After this time
has elapsed, the television switches to standby
mode.
1
Select the line »Sleep Timer« with »
V
« or
»
Λ
«.
2
Enter the switch-off time with »
<
« or »
>
«.
Note:
7
To switch off the function, use »
<
« or »
>
« to
set the switch-off time to »Off«.
3
Press »
i
« to end the set-up.
Switch-ontimer
In the »Auto On« menu you can enter a switch-on
time for the television. After the preset time has
elapsed, the television switches on from standby
– at the preselected volume and the preselected
television channel.
1
Select the line »Auto On« with »
V
« or »
Λ
«
and press »
●
« to confirm.
2
Select the line »Mode« with »
V
« or »
Λ
« and
use »
<
« or »
>
« to select when the television
should switch on.
3
Select the line »Input Source« with »
V
« or »
Λ
«
and use »
<
« or »
>
« to select the input source.
4
Select the line »Service Type« with »
V
« or »
Λ
«
and use »
<
« or »
>
« to select the preferred op-
tion (ATV, DTV, Radio or DATA).
5
Select the line »Channel« with »
V
« or »
Λ
«
and use »
<
« or »
>
« to select the preferred
channel.
Note:
7
The line »Channel« is only active when the in-
put signal currently in use has been set. If no
entry has been made, then the first channel of
the selected input source will be used.
Summary of Contents for VLE 7131 BF
Page 1: ...LCD TV EN VLE 7131 BF...
