12
www.grunkel.com
Inserting the Glass jug
1.
Make sure that the blender is switched off (Switch in the“0” setting) .
2.
Place the jug assembly (9) on to the motor block (7) and press down until securely
engaged.
How to use
1.
Place the foodstuff you wish to process into the glass jug.
2.
Put the lid on the glass jug and close securely. Place the measuring cap into the
hole in the lid and turn clockwise to lock.Switch on the motor block.
Speed settings
“1-2” setting for light usage with liquids
“3-5” setting for more solid consistency for mixing liquids and solid food
“P” setting for ice crushing&short,powerful impulse movements
After using the blender,always move the switch into the “o” setting and pull out the
socket out from power supply
To remove the glass jug just lift it up.You do not have to rotate the Glass jug to
remove it.
Do not keep the blender running for more than 3 minutes consecutively to
prevent motor to get damaged.
Useful tips
-
To achieve the best results when pureeing solid ingredients,placesmall portions
into the glass jug one by one instead of placing a large quantity all at once.
-
If you are processing solid ingredients,cut them into small pieces(2-3cm) first.
-
When mixing solid ingredients start off first with a small amount of liquid.
Gradually add more and more liquid through the opening in the lid.
-
Always place your hand on top of the blender when you are operating the device to
keep it more stable.
-
For stirring solid or very thick liquid ingredients we recommend that you use the
blender in impulse mode.
Never immerse the motor block in water. Wipe it only with a moist cloth, Then wipe it
with dry cloth again.
Simple cleaning/rinsing out the assembled glass jug
BEFORE CLEANING THE UNIT BE SURE TO UNPLUG THE SOCKET FROM POWER
SUPPLY
1.When cleaning the blender,use Pulse button for easy removal of contents in blender.
2.To clean the blender jug, fill it with some hot water.Then press the Pulse botton for
a few seconds.
Remove jug and then wash in the water. After washing,please wipe the blender with
damp cloth, then wipe it with dry cloth again.
3.Be sure the jug is empty before removing it from the motor (base)
4.Do not clean the motor unit in water, wipe the motor unit with damp cloth.
