E 10210 12 - 2005
Protocols:
MODULAR X6 CCTALK VALIDATOR 71
Data 2 = -1: Wide band
0: Normal band (default)
1: Narrow band
2: Super narrow band
The modification process of security level and its characteristics is indicated in the command
MODIFY SECURITY SETTING [181].
Command protected by a PIN.
Notes:
a)
A NACK is returned if:
-
The Exit module does not have its software correctly loaded
-
The Exit module does not have their tables correctly programmed.
-
It has received an incorrect coin code
b)
This command is not available if the Validator is working in “Secure Mode”.
5.52
MODIFY BANK SELECT [179]
Command not available in “Secure Mode”.
The Machine indicates to the Validator which bank of coins is activated at each moment:
Send:
[Dir] [1] [1] [179] [Data 1] [Chk]
Reply:
[1] [0] [Dir] [0] [Chk] -> ACK without data
Where Dir = address of the corresponding validator.
Data 1 = 0, 1, 2, 3: Number of bank.
Only the coins that are assigned the indicated bank can be accepted.
This information will be stored in the Flash memory of the Validator:
Command protected by a PIN.
