E 10210 12 - 2005
Protocols:
MODULAR X6 CCTALK VALIDATOR 80
Note:
a)
A NACK is returned if the Validator does not have its software correctly loaded or there
has been an error in starting the modification of the tables of the Validator.
c)
This command is not available if the Validator is working in “Secure Mode”.
5.64
UPLOAD TABLES [98]
Command not available in “Secure Mode”.
This command is used to modify the programming of coins of the Validator:
Send:
[Dir] [n] [1] [98] [Data 1] [Data 2] [Data 3] ... [Data n] [Chk]
Reply:
[1] [0] [Dir] [0] [Chk] -> ACK without data.
Where Dir = address of the corresponding validator
Data 1 = block counter: not used
Data 2 = line counter: not used
Data 3 ... Data n = coin programming data
The format of the data: Data 1 ... Data n is identical to that indicated in the command UPLOAD
FIRMWARE [140].
Azkoyen will provide the coin programming data to transmit to the Validator: Data 3... to Data
n.
The quantity of data to transmit is variable. The maximum is 36 bytes in each string, to that
the block and line counters are added.
The values corresponding a Data 1 and Data 2 (block and line counters) are not used by the
Validator. The control of the integrity of the data is in the block of data provided by Azkoyen.
Command protected by a PIN.
Note:
a)
A NACK is returned if:
-
The Validator does not have its software correctly loaded.
-
The command BEGIN TABLES UPLOAD [99], has not previously been transmitted.
