These instructions apply to the following models: MSC 800
FCE, MSC 800 FCM, MSC 2000 FCE e MSC 2000 FCM.
The automatisms MSC 800 - MSC 2000 gearmotor is an
electro-mechanical operator designed for moving sliding
gates.
The non-reversing reduction system ensures the gate is
mechanically locked when the gearmotor is not operating,
therefore it is not necessary to install any electric lock
A convenient manual release with customised key makes it
possible to move the gate in the event of a power failure or
malfunction of the operator.
The MSC 800 - MSC 2000 gearmotor was designed and built
for controlling vehicle access.
AVOID ANY OTHER USE WHATEVER.
1. DESCRIPTION AND TECHNICAL SPECIFICATIONS
1.2. MAXIMUM USE CURVE
The curve makes it possible to establish maximum work time
(T) according to use frequency (F). With reference to IEC 34-1
Standard, the MSC 800 - MSC 2000 gearmotor can operate at
a use frequency of 40%.
To ensure efficient operation, it is necessary to operate in the
work range below the curve.
Important:
The curve is obtained at a temperature of 20°C.
Exposure to the direct sun rays can reduce use frequency
down to 20%.
Calculation of use frequency
Use frequency is the percentage of effective work time
(o closing) compared to total time of cycle (o
c pause times).
Calculation formula:
%F =
______________________
Ta + Tc
Ta + Tc + Tp + Ti
X 100
where:
Ta = opening time
Tc = closing time
Tp = pause time
Ti = time of interval between two complete cycles
1.1. DIMENSIONS MSC 800 - MSC 2000
1.3. TECHINICAL SPECIFICATIONS
MODEL
MSC 800
Power supply
Absorbed power (W)
RPM (X min.)
Absorbed current (A)
Capacitor
Reduction Ratio
Pinion
Thrust on pinion (daN)
Winding thermal protection
Use frequency
Oil quantity (Lt)
Oil type
Operating temperature
Gearmotor weight (Kg)
Protection class
Gate max weight (Kg)
Gate speed
Clutch
550
1,7
16 uf
80
150°C
40%
0,250
16
1000
9,6 ml/min.
No
(electonic clutch is
reccomended)
2000
Double disc
in oil
IP 44
17
1
Intensive use
Total Equivis HZS 68
-20°C +55°C
150
130°C
1 : 30
Modulo 4 - Z16
25 uf
2,4
650
1400
230V (+6% -10%) 50Hz
MSC 2000
mm. 290
mm. 210
mm. 335
MOTOR MSC 800 - MSC 2000
