Instructions for Use
Using the Ampli-Phone (iPhone version shown)
The Ampli-Phone consists of three parts.
Horn
Throat
Rubber Dock
If you wish to use the Ampli-Phone as a dock to charge and/or sync your iPhone, thread the USB end of your
Apple-supplied dock connector through the hole in the rubber dock. Press the other end evenly into the recess
provided. Ensure that the printed symbol on the connector faces forward. It is important that the orientation
of this connector be correct. If you are unsure of the orientation, you should connect the charging cord to
your iPhone before inserting the cord into the rubber dock. When you insert the iPhone into the dock, the
connector will be oriented correctly.
The connector will fit very firmly into the recess in the dock, so it will stay in place as you remove or insert the
iPhone. If you do not need to use the dock connector, you may leave it out, as the Ampli-Phone works equally
well with or without the dock connector.
