USER MANUAL
42
Alarm
: Click
to enter the
parameter settings
of LCD:
Channel
:
Select the channel you want to configure
Switch:
Enable or disable the PID function
Buzzer
: Disable or enable the buzzer’s alarm tone. Can be set to 10, 20, 40 or 60 seconds when the
detection is triggered
Alarm Out
:
If your NVR supports a connection to an external alarm device, you can set it to emit
an alarm tone.
Latch Time
:
Configure the duration of the external alarm when the detection is triggered
.
Record Channel:
Select the channel(s) you want to record when the detection is triggered.
Post Recording
:
You can set how long the NVR will continue to record after an event has occurred.
Show Message:
A letter “S” will be displayed on the screen when the PID function is triggered.
Send Email:
If an alarm is triggered, an Email will be sent to your preset email account.
Full Screen:
When the detection is triggered, the channel will enlarge to full screen.
FTP Picture Upload:
If an alarm is triggered, a Picture will be sent to your preset FTP account.
FTP Video Upload:
If an alarm is triggered, a Video will be sent to your preset FTP account.
Picture to Cloud:
If an alarm is triggered, a Picture will be sent to your preset Cloud account.
Video to Cloud:
If an alarm is triggered, a Video will be sent to your preset Cloud account.
