INSTALLATION
32
PNEG-1521
Commercial Direct Gear Drive Bin Sweep Auger
A. Join the Housing Bracket and the Gear Driven
Reduction Wheel together with two (2) 1/2" x 4-½”
Grade 5 bolts, two (2) flat washers, and two (2)
Nylock nuts.
12. SWEEP WHEEL INSTALLATION
B. Attach the Mounting Bracket to the Housing
Bracket using two (2) 3/8" x 1-½” Grade 8 bolts,
two (2) flat washers, and two (2) Nylock nuts.
FIG.12-A
FIG.12-B
Housing Bracket
1/2" x 4-1/2"
Hex Bolt
1/2" Flat
Washer
1/2" Nylock Nut
Gear Driven Wheel
Reduction Drive
3/8" Nylock Nut
3/8" Flat Washer
3/8" x 1-1/2"
Hex Bolt
Mounting Bracket
with Anchor Loop