8. 16"-24" Head Platform Assembly
PNEG-1807CE
CE Compliant 16"-24" Bucket Elevator Platform and Ladder “X” Series
55
Install Deck C to Main Support Channels
1. Using 3/8" x 1" carriage bolts (S-3585) and 3/8" flange nuts (S-10028), connect Deck C to main
support channel.
IMPORTANT:
2. Install decking support (HP1624DS) to up-leg end of Deck A as shown. Using five (5) 3/8" x 1" bolts
(S-7105) and 3/8" nuts (S-10028).
3. Install the hatch deck support bar (HP1624HDSX) to Deck C. This piece installs on the underside of
Deck C and extends the width of the deck from edge to edge.
a. Using 3/8" flange nuts (S-10028) and 3/8" x 3/4" flange bolts (S-7105), connect the hatch deck
support bar to the kick plate attached to Deck C and to the hole labeled
A2
on decking nearest the
side toe board and lower head. Torque to standard specifications.
Figure 8F 16" Deck C to Support Channels
Figure 8G Deck C HP Deck Support as Viewed from Underneath.
Ref #
Part #
Description
Ref #
Part #
Description
A
S-3585
3/8" x 1" Carriage Bolt
C
HP1624DS
HP1624 Decking Support
B
S-10028
3/8" Flange Nut
D
HP1624HDSX
Hatch Deck Support Bar
16"-24" Deck C to
Support Channel
DECK C
16"-24" Deck C HP Deck
Support - Underneath View