13. Legs and Leg Bracing
70
PNEG-1461
12' and 15' Bulk Feed Tank Series and Grain Hopper Tank Series
Installation of Leg to Sidewall for 15' BFT
When installing legs to sidewall, reverse normal insertion procedure on bolts. Place hex head and
neoprene washer to inside of sidewall, leaving threaded portion of bolt protruding outward. This provides
for a weather-tight seal at the leg attachment location.
NOTE:
Insert bolts from inside to outside on all leg to tank connections.
Figure 13F Plug Holes
Figure 13G
Figure 13H Installing legs to bin with bolt heads on the
inside of bin and nuts on the outside.
