13. Legs and Leg Bracing
PNEG-1461
12' and 15' Bulk Feed Tank Series and Grain Hopper Tank Series
71
12'-15' Leg Bracing
for attachment points of bracing. Use 3/8" nuts and bolts to attach cross ties to each
other and to leg. Hopper braces are attached to legs with 3/8" nuts and bolts and to hopper collar with
5/16" hardware. Ladder standoffs are attached to legs with 5/16" nuts and bolts.
show typical bracing attachment points to the leg. Do not tighten any hardware
until all bracing is in place. See chart
for dimensions called out as shown in
Figure 13I Typical 12' and 15' 45° Bracing Layout
Tank
“A”
“B”
“C”
“D”
12' 60°
36.962"
66.962"
112.359"
12' 45°
66.962"
36.962"
15' 60°
50.596"
75.596"
138.250"
15' 45°
80.596"
50.596"
“A”
“B”
