4. Assembly Instructions
54
PNEG-1785
NCHT “X” Series Ladders
5. Attach the ladder flare to the ladder using 5/16" hardware. You must drill the bottom hole through the
ladder and use 5/16" hardware.
Attach the narrow safety cage bracket, cage hoops and cage splice brackets to the ladder flares and
platform posts. This must all be assembled at the same time using 5/16" hardware.
NOTE:
Be sure the ladder flares are vertical and parallel to the platform posts by adjusting the
splice brackets. The ladder should be square to the platform.
Figure 4AX
Summary of Contents for NCHT X Series
Page 1: ...PNEG 1785 NCHT X Series Ladders Assembly Instructions PNEG 1785 Date 01 27 11 ...
Page 2: ...2 PNEG 1785 NCHT X Series Ladders ...
Page 49: ...4 Assembly Instructions PNEG 1785 NCHT X Series Ladders 49 Ladder Splice Detail Figure 4AS ...
Page 60: ...4 Assembly Instructions 60 PNEG 1785 NCHT X Series Ladders Ladder Splice Detail Figure 4BD ...