Stay Clear of Rotating Parts
• Do not enter the bin while the equipment
is in operation.
• Entanglement in rotating augers will
cause serious injury or death.
• Keep all guards and covers in place at
all times.
• Lock-out power source before making
adjustments, cleaning, or maintaining
equipment.
ST-0008–2
Use Unload Equipment Properly
• Do not operate this equipment alone. Make sure someone
nearby is aware of the proper shut down sequence in the
event of an emergency.
• Do not allow any person intoxicated or under the influence of
drugs to operate this equipment. All operators must be
adequately rested and prepared to perform all functions of
operating the equipment.
• Do not start equipment until all persons are clear of the work
area and safety guards are in place.
•
Do not allow anyone inside a bin, truck, or wagon which is
being unloaded by an auger. Flowing grain can trap and suf-
focate in seconds.
• Use ample overhead lighting after sunset to light the work
area.
• Always use caution to not hit the auger when positioning the
load.
• Do not leave equipment operating while unattended.
• Be aware of pinch points, which can trap or catch objects
and cause injury.
• Be sure all equipment is locked in position before operating.
• Always lock out all power sources to the equipment when
unloading is finished.
ST-0051–1
PNEG-2108
8" and 10" Standard Duty and IW Standard Duty
9
