background image

Page 4 of 4

Model:

REC25HV

Unit 2, 110 Station Road, Seven Hills ,NSW,  2147, Australia

25A High Voltage Reducer / Charger

Operating Instructions

Please read these instructions before use

Warranty Conditions:

 The product is warranted to be free from defects in materials and workmanship under normal use and service for a period 

of 24 months from the date of sale. This warranty covers defective parts and workmanship provided that the product is shipped prepaid to the 
seller within 24 months of purchase of goods. This warranty is limited to the repair or replacement (at the manufacturers’ discretion) of parts 
and shipping prepaid to the original despatch destination. We regret that no liability can be accepted for consequential or special damages 
of any kind howsoever arising in connection with products supplied by the seller. This warranty is in lieu of all other warranties expressed or 
implied. No representative is authorised to assume for the seller any other liability in connection with the seller’s products.

REC-HV-R2

Specifications

REC25HV

Input Voltage Range [ VDC ]  

12V Mode

Shutdown : 18V ± 5%

Turn On : 22V ± 5%

24V Mode

Shutdown : 36V ± 5%

Turn On : 44V ± 5%

Typical Efficiency 

Greater than 85%

Bulk Charge Current [A]

25A

Stand – By Current [mADC]

<70mA Ingition On , <1mA Ignition Off 

Features

Short Circuit Protection

Over Voltage and Thermal Protection

Dimensions [ L x W x H] 

155mm x 177mm x 68mm

Weight 

1.4Kg

More information https://www.caravansplus.com.au

Summary of Contents for REC25HV

Page 1: ...to Absorption Mode Absorption Mode In this mode the battery charger output voltage is maintained at 14 5V 29V until the current drops below a controlled threshold The battery is brought up to a 90 charge then enters float mode Float Mode The voltage is reduced to 13 5V 27V and maintained at that level with the charger supplying just enough current to maintain the battery at full capacity Fixed Mod...

Page 2: ...e use 7 Never smoke or light cigarettes near a battery 8 Do not place tools on top of battery or allow tools to fall on battery 9 Always wear eye protection near a charging battery 10 Ensure a well ventilated area is used when testing or re charging batteries 11 Ensure ventilation is adequate and venting holes are not obstructed Inadequate ventilation may over heat the unit and cause inefficient o...

Page 3: ...1 2 Lithium Absorption 14 6V 29 2V Float 12 6V 25 2V Link 2 3 Vented Lead Acid Absorption 14 5V 29V Float 13 5V 27V B6 Linked 12V Mode Factory Default No Link 24V Mode A2 Linked Charger mode Chemistry set by J10 No Link Reducer Mode Fixed output 13 5V 27V Voltage set by B6 IGN Link 1 2 Constant ON Where the igition wire is not used and alternative arangments are made to turn the unit on and off vi...

Page 4: ...repaid to the original despatch destination We regret that no liability can be accepted for consequential or special damages of any kind howsoever arising in connection with products supplied by the seller This warranty is in lieu of all other warranties expressed or implied No representative is authorised to assume for the seller any other liability in connection with the seller s products REC HV...

Reviews: