INSTRUCTIONS
Slide the simcard into the holder ensuring that the clipped corner of the simcard lines up
with the clipped corner of the simcard holder.
Powering 3G GSM Keypad
Connect 12 volts to the input connector as per figure 1. Once power has been applied the
blue
network LED light will flash once every second. Once a signal has been found the
green
ready LED will come on and stay on indicating the unit is now ready for use.
Signal Strength
To help make sure that you place the unit in a suitable position you can text the unit to see
how much signal strength the dialler is receiving. Simply text the units number the
command
#
SIGNAL
#
The dialler will perform a test on the signal strength. You will receive a text telling you a
signal strength score between 0 up to 30 we strongly recommend that you place the unit
where you can receive a signal strength score of at least 10. You will find that with a score
of less than 10 will make the unit unreliable.
3
IMPORTANT - PLEASE READ
PLEASE MAKE SURE YOU DISCONNECT THE POWER WHEN YOU FIT THE
SIMCARD AND THAT YOU PLACE THE SIMCARD WITH THE CLIPPED CORNER AS
SHOWN IN THE DIAGRAM ABOVE
