INSTRUCTIONS
IMPORTANT- PLEASE READ
PLEASE MAKE SURE YOU DISCONNECT THE POWER WHEN YOU FIT THE
SIMCARD.
PLACE THE SIMCARD WITH THE CLIPPED CORNER FACING OUT WARDS.
PLEASE SEE PICTURE ABOVE.
Connect 240 volts to the input connector as per figure 1. Once power has been applied
the
blue
network LED light will flash once every second. Once a signal has been found the
green
LED will come on and stay on indicating the unit is now ready for use.
1: Firstly, please register and put credit on your simcard. Follow the instructions
given by your simcard provider
2: Insert the simcard into a mobile phone and disable the
voicemail
using the codes
below
Vodaphone:
call 1210
Tesco call 2915
T-Mobile:
call 222
O2 call 1760
Orange:
call 4502
Giff Gaff
call 1626
EE - send the text message command VM OFF to 150
Signal Strength
To help make sure that you place the unit in a suitable position you can text the unit to see
how much signal strength the dialler is receiving by texting the command:
#
SIGNAL
#
The unit will perform a test on the signal strength.
You will receive a text telling you the signal strength score between 0-30. We strongly
recommend that you place the unit where you will receive a score of at least 10. You will
find that a signal strength score of less than 10 will make the unit unreliable.
Page 3
