Page 4
How to program the roller shutter opener.
Text message entry
The unit has a caller ID function so only authorised numbers you store can activate the unit.
If caller ID is left OFF anyone phoning the units number can operate the relays.
To turn caller ID on send the text message
#
ID
=
ON
#
To turn caller ID off send the text message
#
ID
=
OFF
#
The unit will reply Caller ID On or Caller ID Off
Using Caller ID
To use caller ID you must first enter the telephone numbers that are authorized to use the
Roller Shutter Opener.
Once you have followed the steps from Page 3 and have inserted your simcard into the
Roller Shutter opener you will receive a steady
green
light. This indicates that you have a
mobile signal.
You will now need to send a text with the contact numbers.
Example: (
Hash
) (WHL) (
Equals
) (phone number) (
hash
)
To avoid confusion we have colour coded the hash (
#
) and the star (
=
) symbols.
Example:
#
WHL
=
07123456789
#
Then send this as a text to the simcard
NOTE
PLEASE NOTE YOU CAN ONLY SEND ONE NUMBER AT A TIME. (Max 200 numbers)
PLEASE SEND THE TEXT MESSAGE AND WAIT FOR THE ROLLER SHUTTER
OPENER TO SEND YOU BACK THE TEXT ACKNOWLEDGEMENT “STORED” BEFORE
YOU TRY TO ADD ANOTHER NUMBER VIA TEXT ENTRY.
If you wish to cancel a number follow this example.
(
Hash
) (delete) (
Equals
) (NUMBER) (
Hash
)
#
Delete
=
07123456789
#
Deletes the stored number
Please make sure you have credit on your simcard to receive the text acknowledgment.
It may take a time to receive a text acknowledgement. This depends upon how busy your
telephone network is.
