6. PREPARING OF OPERATION
1)Install the SIM card, refer above chapter 5, page 8.
2)Install the antenna to the Antenna socket " ( 4-2,
Fig. 1 ) properly.
3)Connect the plug of the Power Adapter into
" DC 9V power adapter socket " ( 4-1, Fig. 1, Fig. 4 )
4)Power on the unit by engage the " Power On/Off
switch " ( 4-3, Fig. 1, Fig 4 ) to the ON position.
5)LCD display, System indicator and Output indicator :
* The LCD will lit and count down from
90 seconds back to 0 second then present the
SETUP SCREEN ( refer page 10 ).
* The " Output indicator " ( 4-7, Fig. 1 ) will show
the default Relay On/Off status, if the Relay On
the " Output indicator " will lit.
* The " System indicator " ( 4-6, Fig. 1 ) will flash
( per 1 second On, 1 second Off ) if the CPU Circuit
working properly.
6)GSM indicator ( 4-4, Fig. 1 )
a. If the GSM modem is not connecting the mobile
network, the " GSM indicator " will flash per
0.6 second On and 0.6 second Off.
0.6 second On
0.6 second Off
9
